National Oilheat Research Alliance 33
10. Apply sealant to the cover
pan around the inner pipe,
joints and tee assembly.
11. Seal or tape the joints from the
termination to the tee assembly.
12. Apply a bead of sealant to
the appliance collar.
13. Apply a bead of
sealant to the inside
of the adapter.
14. With a twisting
motion, assemble the
adapter to the appli-ance
collar.
15. Drive the adapter onto
the appliance using a mallet
and block of wood.
16. Install adapter clamp
onto adapter.
17. Attach flue pipe to adapter. 18. Adjust clamp until both
halves are 1/8" apart.
19. Fasten cover sleeve.
20. Install elbow into bottom
of tee and run intake air pipe
to burner location.
21. Install VRV close to the air inlet
of the burner and adjust for proper
flow.
22. Inspect the assembled unit
and ensure that the burner is
working properly. Perform com-bustion
tests using the port pro-vided.
Apply sealant and install
port plug screw.